Jump to content





Posted Image

PCS & Stuart M. Grant - Cichlid Preservation Fund - Details here


Photo

Trying To Breed Peppermints


  • Please log in to reply
22 replies to this topic

#21 Aaron789

Aaron789
  • Forum Member
  • Joined: 28-January 16
  • Location: Adelaide

Posted 18 March 2016 - 03:50 AM

Na I haven't measured them yet but the two bigger ones would be 10 or so, the smaller one was in the cave today with the other one I thought was a female guarding it, so I might wait a couple days and see if anything happens,
Thanks for the help so far

#22 bigjohnnofish

bigjohnnofish
  • Forum Member
  • Joined: 02-August 10
  • Location: Banjo Country aka just past Mundaring

Posted 18 March 2016 - 10:24 PM

sounds like the one you thought was a female could well be a male..... :)



#23 Hood

Hood
  • PCS Club Member
  • Joined: 06-February 08
  • Location: Clarkson, WA

Posted 17 November 2016 - 10:21 AM

I know it's a bit of an old post. But thought I'd throw it out there.
In my experience the one thing that makes breeding peppies different to other bristlebums. Is that I found to trigger spawning with my Peps in the past, you had to switch the tank off for like four hours. Just let it go dead, no airation, no heater, nothing for about four hours or so. Then fire it back up.
I don't know why, but in my experience this extra step was required to breed my peps, where as commons, albino's, calicos, long fins, silver tips, etc. etc. did not really need this step.
I hope this helps someone in their quest to breed this fantastic fish. :)




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users