Anyone know of someone who sells these? according to the net (from a few years ago) eheim dont acctually sell the o-ring individually :/?
Posted 08 January 2015 - 09:56 AM
Anyone know of someone who sells these? according to the net (from a few years ago) eheim dont acctually sell the o-ring individually :/?
Posted 08 January 2015 - 10:23 AM
Posted 08 January 2015 - 06:28 PM
Primer O-ring? Aquotix, Vebas... Maybe Morley. Ring first.
I bet it's the tap unit leaking, though....
Posted 08 January 2015 - 10:30 PM
If it's the head seal, they are instock at the moment at Aquotix, If it's the primer seal they will be in stock soon.
Posted 08 January 2015 - 11:21 PM
Posted 09 January 2015 - 12:31 AM
Posted 09 January 2015 - 10:51 AM
Replace both then you don't have to worry
Posted 09 January 2015 - 03:17 PM
Better yet, take the filter to an authorised Eheim store. They can work it out for you
Posted 09 January 2015 - 11:22 PM
It will be the one the waters coming out from.
Posted 10 January 2015 - 08:34 PM
If you're going to replace the primer oring be sure to replace the oring on the flow indicator too. It's fairly easy to do but it can be dropped into any independant LFS that deals with eheim for replacement/ installation of those parts.
Posted 11 January 2015 - 12:24 AM
A lot of the time the leaking seal just needs removing, relube it generously with vasoline and repositioned. If the other seals are not leaking then don't disturb them, the one that usually leaks is the head seal because you have to break the seal every time you clean it. I don't use the plunger to prime so have never had to replace it.
Posted 11 January 2015 - 05:50 AM
If it's a 2026 0r 2028 Pro 2, I bet it's the taps.
Posted 17 January 2015 - 11:51 AM
Posted 24 January 2015 - 07:59 AM
Posted 24 January 2015 - 12:28 PM
Posted 24 January 2015 - 12:39 PM
Posted 24 January 2015 - 04:12 PM
Ok well. It wasn't the oring, water seems to be dripping from one of the 4 little hold down clip things.
The head is filling up slowly from the leak and it is exiting at the lowest point, which is under the clip.
I have had it on a couple of 2028 canisters and always found it to be the tap unit. Primer O-ring is suspect as well.
Posted 24 January 2015 - 07:30 PM
Posted 24 January 2015 - 11:10 PM
gee you dont get service like that in many places these days... i'd be making the trip to aquotix for an offer like that... thats for sure
Posted 25 January 2015 - 12:12 AM
That's why there still around and the rest have gone under. Shops that take your details and never get back to you after saying they will, never see me again.
0 members, 0 guests, 0 anonymous users