omg.... poor fish.....
Cant Get Ammonia Down
#61
Posted 23 January 2011 - 11:51 PM
#62
Posted 24 January 2011 - 07:02 AM
I also put another batch of cichlid salts in.
will check levels again this morning.
#63
Posted 24 January 2011 - 07:37 AM
A symptom of nitrite poisoning is gasping, hence why fishes that are affected by nitrite poisoning look like they are gasping for air. But no amount of aeration would fix this problem because the nitrite stops the uptake of the oxygen in the fishes. Called brown blood disease. And as Mr_docfish explains it, salt blocks the uptake of nitrite.
So if you don't see your fishes show this symptom, they should still be fine... hence even after your tank is cycled, I would recommend keeping a good level of salting to mitigate against nitrite spikes, either due to normal feeding or abnormal events. Cheap insurance IMO.
And as Mr_Docfish explains, there are different types of chlorides, depends on your pocket. Personally because I have big outdoor tanks, I use pool salt (20kg $6.50).
#64
Posted 25 January 2011 - 07:03 AM
I am keeping the salts in there, Fish look happy.
#65
Posted 25 January 2011 - 07:38 AM
#66
Posted 25 January 2011 - 06:54 PM
#67
Posted 25 January 2011 - 08:45 PM
#68
Posted 27 January 2011 - 05:26 PM
Ammonia 0.15 ish
Nitrite 0.25 ~ 0.50 Massive drop from the 5 it was at,
Nitrate is around 20ppm ish
So is there anything more i should do at this stage ?
#69
Posted 27 January 2011 - 09:29 PM
What is your pH?? The nitrification process naturally lowers pH, but you don't want it to drop too quickly as it affects both the fishes and the bacteria.
Well if your fishes have not eaten for over a week now, it should be alright to give them very small feeds alternate day to start with. Just remember that every time you increase the feed, the tank will need to carry out mini-cycles to get up to the new bioload... So watch your ammonia levels... So test before you feed... if the levels have gone up, skip a day and feed the next day.
Continue this process patiently and before you know it, you will be feed them their full feed without impact on increase ammonia and nitrite levels...
#70
Posted 28 January 2011 - 06:21 AM
It is so hard to match these colours I always doubt my self lol painful, need a probe that sits in there tests for everything electronically on a digital meter lol.
Levels this morning are
PH : 7.4
Ammonia : 0 ~ 0.1
Nitrite: 0~0.1
Nitrate: 5.0
I say 0~0.1 Becuase it isnt either of the colours above and below , so figure there must be the smallest partical of detection in the test.
#71
Posted 28 January 2011 - 07:46 PM
#72
Posted 28 January 2011 - 07:48 PM
tonight after work levels are
PH 8.2
Nitrite 0
Nitrate 5 ppm
Ammonia 0.1 this is hard to tell it basically looks 0 though just a slight slight tint of green barely enough to recognise so just guessing 0.1
Tim
#73
Posted 29 January 2011 - 04:47 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users