![smile.gif](style_emoticons/default/smile.gif)
Parts needed
2x 20mm elbow with thread
2x 20mm elbow
1x 20mm ball valve tap
1m length of 20mm PVC pipe
1x threaded hose fitting
PVC glue
Step 1.
Cut pipe into 4 sections like this
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/5f7f87c4.jpg)
Step 2.
Glue small section to both un-threaded elbows
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/3a5e0c1c.jpg)
Step 3.
Use the 2 same size lengths for the tap section and glue in place
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/bc8f5c93.jpg)
Step 4.
Glue the tap section into the smaller elbow section
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/4c0c6af9.jpg)
Step 5.
Take your threaded elbow and glue it to the bottom of the tap section
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/d1034854.jpg)
And screw in your hose fitting
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/81f2b157.jpg)
Step 6.
Glue the other threaded fitting into the last length of PVC pipe and glue into place
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/17694679.jpg)
That's it ready to go, just plug in your hose and your set to go
![smile.gif](style_emoticons/default/smile.gif)
![](http://i1231.photobucket.com/albums/ee515/Munsen_burner/868fdd98.jpg)
Happy Tanking
![smile.gif](style_emoticons/default/smile.gif)