Attention all do it yourselfers , a quick announcement in the interests of safety .
We have recently had a couple of DIY topics involving modifications of 240 volt electrical aquarium equipment. The committee as a whole decided to remove these topics as we see this practice to be unsafe and therefore not advised. Not only should any work carried out on 240v electrical appliances be done by a qualified electrician , furthermore extra care should be taken with the use of electrical aquarium accessories as we all know , water and electricity don't mix .
We ask that all members and forum users refrain from posting any such modifications involving 240v products , these projects may incite someone inexperienced to give it a go and they could seriously injur themselves or somebody else through electricution sometimes even resulting in death.
Thankyou
240 V Diy Not Advised
Started by scottyhooton, Oct 21 2011 01:52 PM
2 replies to this topic
#1
Posted 21 October 2011 - 01:52 PM
#2
Posted 28 January 2012 - 04:14 PM
So what would the go be with DIY topics involving the use of extra low voltage power? For example, alot of LED lights only require an input of 12V DC, which could easily be supplied by a plug in power supply and would not require the user to be exposed to 240V in any way
#3
Posted 28 January 2012 - 04:22 PM
That is fine.
Previously we have had posts saying how to wire fluros to mains etc.
If you have to plug in a plug pack, you can post it, just no mains wiring.
Andrew
Previously we have had posts saying how to wire fluros to mains etc.
If you have to plug in a plug pack, you can post it, just no mains wiring.
Andrew
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users