Jump to content





Posted Image

PCS & Stuart M. Grant - Cichlid Preservation Fund - Details here


Photo

Inline Heater Vs Standard Heater


  • Please log in to reply
25 replies to this topic

#21 Brendon

Brendon
  • Forum Member
  • Joined: 28-October 08

Posted 30 December 2009 - 02:57 PM

I have a question regarding the Hydor Inline Heaters (300W). I have a 6x2x2.5 (about 800L). I was wondering how many of these I would need, I'm thinking two may be a tad too little? I have two canisters, so I assume it's no problem to run two off one and one off the other? Thanks for any help.

#22 Jezza

Jezza
  • Forum Member
  • Joined: 29-January 07
  • Location:Seville Grove
  • Location: Seville Grove

Posted 30 December 2009 - 03:09 PM


i had 2 on my 6x2x2 and it kept up just fine...
but if you have the cash for 3, well, it never hurts to have more than needed...

#23 Brendon

Brendon
  • Forum Member
  • Joined: 28-October 08

Posted 30 December 2009 - 03:18 PM


Thanks for the reply, I guess I can start with two and see how it goes, it's summer now so that'll give me time to save for more if I need them smile.gif

#24 Aquotix Aquariums

Aquotix Aquariums
  • Sponsor
  • Joined: 09-October 05
  • Location: 176 Bannister Rd Canning Vale

Posted 30 December 2009 - 04:29 PM

We currently run 2x 300w Hydor Inline heaters on our 8'x30"x30" display tank.....The heaters keep up with volume. It purely depends on the particular room the tank is in. The cooler the average room temperature in winter, the more heaters you require....

#25 tranced

tranced
  • Forum Member
  • Joined: 18-October 09

Posted 31 December 2009 - 06:17 PM

i would think that the way inline heaters work makes them more efficient than the glass ones...

#26 jcahow

jcahow
  • Forum Member
  • Joined: 22-February 09

Posted 07 January 2010 - 12:46 PM

Just be careful with the Hydor ETH inline heaters when tightening their blue tubing attachment rings. I have a number of these heaters but I had one that one of the tubing attachement rings split on, I guess from over tightning. The attachment ring are made of kinda flimsy plastic and when they are tightened they are under constant pressure. Luckily the inline heater did not leak even with the tubing attachment ring entirely missing (which would seem to indicate they do not need to be very tight). I did contact Hydor through their website and they said they were sending me another tubing attachement ring although I have yet to see it arrive.

The heaters themselves seem to work just fine and I have 300W heaters on two Eheim canisters for a 70 gallon tank which sets in a room that can drop down to 12 degrees C in winter (it gets down to -30 degrees C outside here) and they hold the tank rock solid at 25 degrees C.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users