Building My Own 3 Tier Stand
#1
Posted 08 March 2011 - 06:48 PM
steel - 50x50x2 galvanised RHS steel. (i know its a bit overkill but it was priced right)
dims - 1.75m high designed to fit 3 x 3x18x18 tanks
welder - arc with 6013 rods
Step 1
cut steel to length
Step 2
Prep using grinder to remove galv at each end.
#2
Posted 09 March 2011 - 07:17 PM
tack front and back sections
Step 4.
Tack sides
Step 5.
Get it all level and tack together
#3
Posted 11 March 2011 - 05:37 PM
#4
Posted 11 March 2011 - 05:47 PM
welding rods = $20 ish
so $120 all up.
will do the final welds in the next couple of days time permitting. May look at powder coating but not sure what the cost of that will be..
#5
Posted 11 March 2011 - 06:11 PM
Nice one
Edited by bowdy88, 11 March 2011 - 06:12 PM.
#6
Posted 11 March 2011 - 06:19 PM
I dont think I have any rust on any of them yet, and some are 4 years old now.
Much cheaper than powder coating, and looks ok.
#7
Posted 13 March 2011 - 05:49 PM
Also bought some of these to place over the top of the bottom 2 tanks.
http://cgi.ebay.com....6#ht_1715wt_922
Not sure how many ill need but 5m worth should be bright enough
Edited by -Pete-, 13 March 2011 - 05:54 PM.
#8
Posted 13 March 2011 - 07:16 PM
#9
Posted 13 March 2011 - 07:33 PM
Edited by -Pete-, 13 March 2011 - 07:35 PM.
#10
Posted 13 March 2011 - 07:53 PM
Think they were $70 for 3m length with transformer plug. they have adhesive strip in the backnof the strips to.
You buy it by the meter.
Cheers.
#11
Posted 14 March 2011 - 02:20 PM
I think they are 90cm long and cost $19.95. 3000Kelvin
I'm happy with mine, I recommend checking them out as they have a number of options including colour changing ones.
#12
Posted 14 March 2011 - 06:56 PM
These could have been good too.
http://www.dinodirec...t...UD&AFFID=74
Edited by -Pete-, 14 March 2011 - 06:59 PM.
#13
Posted 14 March 2011 - 07:48 PM
Cheers.
Edited by bowdy88, 14 March 2011 - 07:51 PM.
#14
Posted 14 March 2011 - 08:29 PM
#15
Posted 14 March 2011 - 09:16 PM
#16
Posted 14 March 2011 - 09:50 PM
#17
Posted 15 March 2011 - 07:34 AM
#18
Posted 23 March 2011 - 07:44 PM
Edited by tha_krust, 23 March 2011 - 07:45 PM.
#19
Posted 28 March 2011 - 06:27 PM
Good onya. Which site?
Gave the stand a final coat today, after a bit of experimenting went with charcoal hammered finish which looks pretty sweet. Installed switches to the inside of the rhs for the led lighting and ran the wiring inside the rhs tubing. Painted some aluminum plate that i got from the scrap dealer. Im going to use this on the ends to hold the filters. Photos to come...
#20
Posted 28 March 2011 - 07:37 PM
Gave the stand a final coat today, after a bit of experimenting went with charcoal hammered finish which looks pretty sweet. Installed switches to the inside of the rhs for the led lighting and ran the wiring inside the rhs tubing. Painted some aluminum plate that i got from the scrap dealer. Im going to use this on the ends to hold the filters. Photos to come...
im at sino/citic pacific at cape preston for united group...have you ever heard the expression "cheap chinese crap"?...well that dont even come close.. ha ha
stand sound like its going to look cool, cant wait to see pics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users