8x2.5x2 tank journal
#41
Posted 24 June 2007 - 09:46 PM
Just one thing missing, the picture of you swimming in it
CCA001 i am with you on this one lol
#42
Posted 25 June 2007 - 12:27 PM
i will definitly put up picks when im done ocean reefs in wangara are building it for me complete set up stand,tank,sump,plumbing,installing and delivery its about five weeks away so watch this space
cheers
paul
#43
Posted 25 June 2007 - 05:39 PM
Quick question im going to make a tank tomorrow and I was wondering what size hole you needed for them 40mm overflows and can you get all those bulkhead fittings seen in yours at bunnings?
Also 40mm is 1.5 inchs isnt it?
#44
Posted 25 June 2007 - 06:01 PM
#45
Posted 25 June 2007 - 06:03 PM
Quick question im going to make a tank tomorrow and I was wondering what size hole you needed for them 40mm overflows and can you get all those bulkhead fittings seen in yours at bunnings?
Also 40mm is 1.5 inchs isnt it?
50mm hole for 40mm pipe. 50mm is 2 inches:) my fittings are the cheaper route from bunnings, but a company starting with the letter 'h' makes proper bulk heads for 40mm pipe. what size tank are you making? if your going for 5000lph of flow through the overflow, i would recommend dual overflows, for obvious reasons. i would think that up to about 3500lph you would be safe in terms of noise with a singe 40mm pipe overflow.
40mm is about 1.6 inches i think:)
#46
Posted 25 June 2007 - 06:35 PM
40mm is about 1.6 inches i think:)
Im making a 6x2x2 and im probably going to have like 2400lph pump.
Also do you think 8mm glass would sufficient for a tank this size?
#47
Posted 25 June 2007 - 06:37 PM
#48
Posted 25 June 2007 - 06:40 PM
10 mm it is then
This company starting with "H" does there fittings take a 50mm hole too?
#49
Posted 25 June 2007 - 06:54 PM
#50
Posted 29 June 2007 - 07:19 PM
and me and my ball date last sat night:)
#51
Posted 29 June 2007 - 07:36 PM
fish arnt bad either
paul
#52
Posted 30 June 2007 - 06:32 AM
#53
Posted 28 July 2007 - 09:57 PM
#54
Posted 29 July 2007 - 10:34 AM
#55
Posted 29 July 2007 - 10:42 AM
#56
Posted 29 July 2007 - 11:26 AM
#57
Posted 29 July 2007 - 11:38 AM
thats all folks, nic i hope this is a good enough update
#58
Posted 29 July 2007 - 12:01 PM
#59
Posted 29 July 2007 - 12:03 PM
#60
Posted 29 July 2007 - 12:17 PM
when i used to keep heavly stocked tanks i found the power heads used to let me down also,
i feel when it comes to filtering coffee fuel oil you cant go past presurised filtering it gives a better deeper cleaner clean lols butt hats hard to do with a sump
or just cut back of the fish load ? put in one or two tb,s :twisted:
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users